STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation Seite 93

INSTALLATION
Standard installation
Installing the appliance
Note
If you are installing the appliance with flexible water
connections, also secure the back panel with a screw.
1 Cable entry installation aid
2 Cable grommet
Use the installation aid for easier wiring access through the cable
grommet (see plastic parts set supplied).
f Remove the cable grommet from the back panel. f
f Pull the cable grommet over the cable sheath of the power f
cable. For large cable cross-sections, enlarge the hole in the
cable grommet if necessary.
www.stiebel-eltron.com
1
2
f Remove the transport protection plugs from the water f
connections.
f Bend the power cable 45° upwards. f
f Route the power cable and cable grommet through the back f
panel from the rear.
f Install the appliance on the threaded studs of the wall f
mounting bracket.
f Push the back panel firmly against the wall. Lock the fixing f
toggle by turning it 90° clockwise.
f Pull the cable grommets into the back panel until both lock- f
ing tabs engage.
DHE Connect | DHE Touch | 93