Parameter Name - Balluff BCM R15E-00 DI00 S4 Serie Betriebsanleitung

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
6
IO-Link interface (continued)
Tab. 6-6 provides an overview of the possible parameters
that can be applied in the process data by means of the
user-defined process data profile. For this purpose, the
specified four bytes must be written to the subindex of the
slot of index 0x2001 (8193) to be configured.

PARAMETER NAME

CONTACT TEMPERATURE
HUMIDITY
AMBIENT PRESSURE
v-RMS X
v-RMS Y
v-RMS Z
v-RMS magnitude
v-PEAK-TO-PEAK X
v-PEAK-TO-PEAK Y
v-PEAK-TO-PEAK Z
v-PEAK-TO-PEAK magnitude
v-MEAN X
v-STANDARD DEVIATION X
v-CREST FACTOR X
v-SKEWNESS X
v-KURTOSIS X
v-MEAN Y
v-STANDARD DEVIATION Y
v-CREST FACTOR Y
v-SKEWNESS Y
v-KURTOSIS Y
v-MEAN Z
v-STANDARD DEVIATION Z
v-CREST FACTOR Z
v-SKEWNESS Z
v-KURTOSIS Z
a-RMS X
a-RMS Y
a-RMS Z
a-RMS magnitude
a-PEAK-TO-PEAK X
a-PEAK-TO-PEAK Y
a-PEAK-TO-PEAK Z
a-PEAK-TO-PEAK magnitude
Tab. 6-6: Possible indices for process data
22 english
Byte 0 Byte 1
Contact temperature
0x20 (32) 0x31 (49)
Relative humidity
0x20 (32) 0x41 (65)
Ambient pressure
0x20 (32) 0x49 (73)
Vibration
0x14 (20)
0x15 (21)
0x18 (24)
0x21 (33) 0x19 (25)
0x1A (26)
0x1D (29)
0x1E (30)
Byte 2 Byte 3
0x01 (1) 0x00 (0)
0x01 (1) 0x00 (0)
0x01 (1) 0x00 (0)
0x01 (1)
0x02 (2)
0x03 (3)
0x04 (4)
0x01 (1)
0x02 (2)
0x03 (3)
0x04 (4)
0x01 (1)
0x02 (2)
0x03 (3)
0x04 (4)
0x05 (5)
0x01 (1)
0x02 (2)
0x03 (3) 0x00 (0)
0x04 (4)
0x05 (5)
0x01 (1)
0x02 (2)
0x03 (3)
0x04 (4)
0x05 (5)
0x01 (1)
0x02 (2)
0x03 (3)
0x04 (4)
0x01 (1)
0x02 (2)
0x03 (3)
0x04 (4)