Event List - Balluff BCM R15E-00 DI00 S4 Serie Betriebsanleitung

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
6
IO-Link interface (continued)
6.4

Event list

Module Event
code
DEVICE 0x4000
TEMPERATURE (16384)
1)
0x4210
(16912)
0x4220
(16928)
0x8D10
(36112)
0x8D20
(36128)
CONTACT 0x8CE0
TEMPERATURE (36064)
0x8CE1
(36065)
HUMIDITY 0x8CE5
1)
(36069)
0x8CE6
(36070)
AMBIENT 0x8CEA
PRESSURE (36074)
1)
0x8CEB
(36075)
VIBRATION 0x8CF0
(36080)
0x8CF1
(36081)
0x8CF2
(36082)
0x8CF3
(36083)
0x8CF4
(36084)
only for BCM R15E-002-DI00-_ _ , _-S4
1)
Tab. 6-21: Event list
40 english
Characte- Meaning
ristic
Error TEMPERATURE FAULT - OVERLOAD – The temperature has exceeded the
specified maximum temperature. The heat source must be removed.
Warning DEVICE TEMPERATURE OVER-RUN - CLEAR SOURCE OF HEAT – Danger
of damage to device. Device is too hot. Remove heat source.
Warning DEVICE TEMPERATURE UNDER-RUN – INSULATE DEVICE – Danger of
damage to device. Device is too cold.
Warning DEVICE TEMPERATURE LOWER ALARM – The configured lower
temperature alarm threshold is underrun.
Warning DEVICE TEMPERATURE UPPER ALARM – The configured upper
temperature alarm threshold is exceeded.
Warning CONTACT TEMPERATURE LOWER ALARM – The configured lower
temperature alarm threshold is underrun.
Warning CONTACT TEMPERATURE UPPER ALARM – The configured upper
temperature alarm threshold is exceeded.
Warning HUMIDITY LOWER ALARM – The configured lower humidity alarm threshold
is underrun.
Warning HUMIDITY UPPER ALARM – The configured upper humidity alarm threshold
is exceeded.
Warning AMBIENT PRESSURE LOWER ALARM – The configured lower ambient
pressure alarm threshold is underrun.
Warning AMBIENT PRESSURE UPPER ALARM – The configured upper ambient
pressure alarm threshold is exceeded.
Notification SEVERITY ZONE CHANGE – The degree of severity of the vibration has
reached a different zone.
Warning PRE-ALARM v-RMS – The RMS value of vibration velocity has exceeded the
configured pre-alarm threshold for magnitude or at least one axis.
Warning MAIN-ALARM v-RMS – The RMS value of vibration velocity has exceeded
the configured main-alarm threshold for magnitude or at least one axis.
Warning PRE-ALARM a-RMS – The RMS value of vibration acceleration has
exceeded the configured pre-alarm threshold for magnitude or at least one
axis.
Warning MAIN-ALARM a-RMS – The RMS value of vibration acceleration has
exceeded the configured main-alarm threshold for magnitude or at least one
axis.