Balluff BCM R15E-00 DI00 S4 Serie Betriebsanleitung Seite 81

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
6
IO-Link interface (continued)
Index Sub- Access
index
VIBRATION ACCELERATION ALARM CONFIGURATION
0x210A 0x01 Read/Write PRE-ALARM LEVEL a-RMS X – RMS value of the
(8458) (1)
0x02 Read/Write MAIN-ALARM LEVEL a-RMS X – RMS value of the
(2)
0x03 Read/Write PRE-ALARM LEVEL a-RMS Y – RMS value of the
(3)
0x04 Read/Write MAIN-ALARM LEVEL a-RMS Y – RMS value of the
(4)
0x05 Read/Write PRE-ALARM LEVEL a-RMS Z – RMS value of the
(5)
0x06 Read/Write MAIN-ALARM LEVEL a-RMS Z – RMS value of the
(6)
0x07 Read/Write PRE-ALARM LEVEL a-RMS MAGNITUDE – RMS value
(7)
0x08 Read/Write MAIN-ALARM LEVEL a-RMS MAGNITUDE – RMS
(8)
0x09 Read/Write ENABLE ALARMS a-RMS X – Activates (True) or
(9)
0x0A Read/Write ENABLE ALARMS a-RMS Y – Activates (True) or
(10)
0x0B Read/Write ENABLE ALARMS a-RMS Z – Activates (True) or
(11)
0x0C Read/Write ENABLE ALARMS a-RMS MAGNITUDE – Activates
(12)
www.balluff.com
Description
X-axis that must be exceeded in order to trigger
IO-Link event 0x8CF3 or set the corresponding status
bit. Value in g.
X-axis that must be exceeded in order to trigger
IO-Link event 0x8CF4 or set the corresponding status
bit. Value in g.
Y-axis that must be exceeded in order to trigger
IO-Link event 0x8CF3 or set the corresponding status
bit. Value in g.
Y-axis that must be exceeded in order to trigger
IO-Link event 0x8CF4 or set the corresponding status
bit. Value in g.
Z-axis that must be exceeded in order to trigger
IO-Link event 0x8CF3 or set the corresponding status
bit. Value in g.
Z-axis that must be exceeded in order to trigger
IO-Link event 0x8CF4 or set the corresponding status
bit. Value in g.
that the magnitude must exceed in order to trigger
IO-Link event 0x8CF3 or set the corresponding status
bit. Value in g.
value that the magnitude must exceed in order to
trigger IO-Link event 0x8CF4 or set the corresponding
status bit. Value in g.
deactivates (False) the sending of IO-Link events
(0x8CF3 and 0x8CF4) if the RMS value of the X-axis is
exceeded. The thresholds can be configured in
subindex 0x01 (1) and 0x02 (2).
deactivates (False) the sending of IO-Link events
(0x8CF3 and 0x8CF4) if the RMS value of the Y-axis is
exceeded. The thresholds can be configured in
subindex 0x03 (3) and 0x04 (4).
deactivates (False) the sending of IO-Link events
(0x8CF3 and 0x8CF4) if the RMS value of the Z-axis is
exceeded. The thresholds can be configured in
subindex 0x05 (5) and 0x06 (6).
(True) or deactivates (False) the sending of IO-Link
events (0x8CF3 and 0x8CF4) if the RMS value of the
magnitude is exceeded. The thresholds can be
configured in subindex 0x07 (7) and 0x08 (8).
Data Value Default
type range value
float32 0...16 [g] 16 [g]
float32 0...16 [g] 16 [g]
float32 0...16 [g] 16 [g]
float32 0...16 [g] 16 [g]
float32 0...16 [g] 16 [g]
float32 0...16 [g] 16 [g]
float32 0...16 [g] 16 [g]
float32 0...16 [g] 16 [g]
bool True/False True
bool True/False True
bool True/False True
bool True/False True
english 33