Balluff BCM R15E-00 DI00 S4 Serie Betriebsanleitung Seite 78

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
6
IO-Link interface (continued)
Index Sub- Access
index
VIBRATION SEVERITY ZONE CONFIGURATION
0x2108 0x01 Read/Write SEVERITY ZONE BOUNDARY A/B – RMS value at
(8456) (1)
0x02 Read/Write SEVERITY ZONE BOUNDARY B/C – RMS value at
(2)
0x03 Read/Write SEVERITY ZONE BOUNDARY C/D – RMS value at
(3)
0x04 Read/Write ENABLE SEVERITY ZONE CHANGE EVENT –
(4)
VIBRATION VELOCITY ADVANCED ALARM STATUS
0x2111 0x01 Read only
(8465) (1)
0x02 Read only
(2)
0x03 Read only
(3)
0x04 Read only
(4)
0x05 Read only
(5)
0x06 Read only
(6)
0x07 Read only
(7)
0x08 Read only
(8)
30 english
Description
which the vibration changes between degrees of
severity A and B. Value in mm/s.
which the vibration changes between degrees of
severity B and C. Value in mm/s.
which the vibration changes between degrees of
severity C and D. Value in mm/s.
Activates (True) or deactivates (False) the sending of
the IO-Link event (0x8CF0) in case the severity zone
changes. The severity zone boundaries can be
configured in subindices 0x01 (1) through 0x03 (3).
PRE-ALARM STATUS v-RMS X – The pre-alarm
threshold for the RMS value of the X-axis has (True) or
has not (False) been exceeded.
MAIN-ALARM STATUS v-RMS X – The main-alarm
threshold for the RMS value of the X-axis has (True) or
has not (False) been exceeded.
PRE-ALARM STATUS v-RMS Y – The pre-alarm
threshold for the RMS value of the Y-axis has (True) or
has not (False) been exceeded.
MAIN-ALARM STATUS v-RMS Y – The main-alarm
threshold for the RMS value of the Y-axis has (True) or
has not (False) been exceeded.
PRE-ALARM STATUS v-RMS Z – The pre-alarm
threshold for the RMS value of the Z-axis has (True) or
has not (False) been exceeded.
MAIN-ALARM STATUS v-RMS Z – The main-alarm
threshold for the RMS value of the Z-axis has (True) or
has not (False) been exceeded.
PRE-ALARM STATUS v-RMS MAGNITUDE – The
pre-alarm threshold for the RMS value of the
magnitude has (True) or has not (False) been
exceeded.
MAIN-ALARM STATUS v-RMS MAGNITUDE – The
main-alarm threshold for the RMS value of the
magnitude has (True) or has not (False) been
exceeded.
Data Value Default
type range value
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
bool True/False True
bool
bool
bool
bool
bool
bool
bool
bool