Balluff BCM R15E-00 DI00 S4 Serie Betriebsanleitung Seite 71

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
6
IO-Link interface (continued)
6.2.3 Device temperature
The sensor is equipped with internal temperature
monitoring (index 0x0052 (82)). The device temperature
(sub index 0x01 (1)) and the minimum and maximum values
since the last startup (subindex 0x02 (2) and 0x03 (3)),
since production (subindex 0x04 (4) and 0x05 (5)) and
since the last manual reset (subindex 0x06 (6) and 0x07
(7)) are measured. The values in index 0x0052 (82),
subindex 0x02 (2), 0x03 (3), 0x06 (6) and 0x07 (7) can be
reset for all modules simultaneously by means of a
maintenance reset (see Section System commands on
page 41) or induvidually for the device temperature (see
Section Device commands on page 41).
Index Sub- Access Description
index
DEVICE TEMPERATURE
1)
0x0052 0x01 Read
(82) (1) only
0x02 Read
(2) only
0x03 Read
(3) only
0x04 Read
(4) only
0x05 Read
(5) only
0x06 Read
(6) only
0x07 Read
(7) only
DEVICE TEMPERATURE ALARM CONFIGURATION
0x0053 0x01 Read/
(83) (1) Write
0x02 Read/
(2) Write
0x03 Read/
(3) Write
DEVICE TEMPERATURE ALARM STATUS
0x0054 0x01 Read
(84) (1) only
0x02 Read
(2) only
Tab. 6-7: Device temperature monitoring
only for the BCM R15E-002-DI00-_ _ , _-S4
1)
www.balluff.com
1)
DEVICE TEMPERATURE – current value in °C
MINIMUM DEVICE TEMPERATURE SINCE
STARTUP – Minimum value in °C since the last
startup
MAXIMUM DEVICE TEMPERATURE SINCE
STARTUP – Maximum value in °C since the last
startup
MINIMUM DEVICE TEMPERATURE LIFETIME –
Minimum value in °C since production
MAXIMUM DEVICE TEMPERATURE LIFETIME
– Maximum value in °C since production
MINIMUM DEVICE TEMPERATURE SINCE RESET
– Minimum value in °C since the last manual reset
MAXIMUM DEVICE TEMPERATURE SINCE RESET
– Maximum value in °C since the last manual reset
1)
LOWER ALARM LEVEL DEVICE TEMPERATURE
– Lower threshold for the device temperature in °C
UPPER ALARM LEVEL DEVICE TEMPERATURE
– Upper threshold for the device temperature in °C
ENABLE ALARM DEVICE TEMPERATURE –
Activates (True) or deactivates (False) the sending of
IO-Link events 0x8D10 and 0x8D20 if one of the
thresholds is exceeded or underrun
1)
LOWER ALARM STATUS DEVICE TEMPERATURE
– Lower threshold underrun
UPPER ALARM STATUS DEVICE TEMPERATURE
– Upper threshold exceeded
A lower threshold (index 0x0053 (83) subindex 0x01 (1))
and an upper threshold (index 0x0053 (83) subindex 0x02
(2)) can be defined for the device temperature module. The
sensor recognizes when a threshold is exceeded and sets
the Boolean variables for undershooting the lower
threshold (index 0x0054 (84) subindex 0x01 (1)) or for
exceeding the upper threshold (index 0x0054 (84)
subindex 0x02 (2)).
Additionally, the sensor can trigger IO-Link events if a
threshold is exceeded. The sending of events (see
Tab. 6-21 on page 40) for monitoring the device
temperature can be switched off (index 0x0053 (83)
subindex 0x03 (3)).
Data type
int16
int16
int16
int16
int16
int16
int16
int16
int16
bool
bool
bool
Value Default
range value
0...70 [°C] 0 [°C]
0...70 [°C] 70 [°C]
True/False True
english 23