Balluff BCM R15E-00 DI00 S4 Serie Betriebsanleitung Seite 77

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
6
IO-Link interface (continued)
Index Sub- Access
index
VIBRATION VELOCITY ADVANCED ALARM CONFIGURATION
0x2107 0x01 Read/Write PRE-ALARM LEVEL v-RMS X – RMS value of the
(8455) (1)
0x02 Read/Write MAIN-ALARM LEVEL v-RMS X – RMS value of the
(2)
0x03 Read/Write PRE-ALARM LEVEL v-RMS Y – RMS value of the
(3)
0x04 Read/Write MAIN-ALARM LEVEL v-RMS Y – RMS value of the
(4)
0x05 Read/Write PRE-ALARM LEVEL v-RMS Z – RMS value of the
(5)
0x06 Read/Write MAIN-ALARM LEVEL v-RMS Z – RMS value of the
(6)
0x07 Read/Write PRE-ALARM LEVEL v-RMS MAGNITUDE – RMS value
(7)
0x08 Read/Write MAIN-ALARM LEVEL v-RMS MAGNITUDE – RMS
(8)
0x09 Read/Write ENABLE ALARMS v-RMS X – Activates (True) or
(9)
0x0A Read/Write ENABLE ALARMS v-RMS Y – Activates (True) or
(10)
0x0B Read/Write ENABLE ALARMS v-RMS Z – Activates (True) or
(11)
0x0C Read/Write ENABLE ALARMS v-RMS MAGNITUDE – Activates
(12)
www.balluff.com
Description
X-axis that must be exceeded in order to trigger
IO-Link event 0x8CF1 or set the corresponding status
bit. Value in mm/s.
X-axis that must be exceeded in order to trigger
IO-Link event 0x8CF2 or set the corresponding status
bit. Value in mm/s.
Y-axis that must be exceeded in order to trigger
IO-Link event 0x8CF1 or set the corresponding status
bit. Value in mm/s.
Y-axis that must be exceeded in order to trigger
IO-Link event 0x8CF2 or set the corresponding status
bit. Value in mm/s.
Z-axis that must be exceeded in order to trigger
IO-Link event 0x8CF1 or set the corresponding status
bit. Value in mm/s.
Z-axis that must be exceeded in order to trigger
IO-Link event 0x8CF2 or set the corresponding status
bit. Value in mm/s.
that the magnitude must exceed in order to trigger
IO-Link event 0x8CF1 or set the corresponding status
bit. Value in mm/s.
value that the magnitude must exceed in order to
trigger IO-Link event 0x8CF2 or set the corresponding
status bit. Value in mm/s.
deactivates (False) the sending of IO-Link events
(0x8CF1 and 0x8CF2) if the RMS value of the X-axis is
exceeded. The thresholds can be configured in
subindex 0x01 (1) and 0x02 (2).
deactivates (False) the sending of IO-Link events
(0x8CF1 and 0x8CF2) if the RMS value of the Y-axis is
exceeded. The thresholds can be configured in
subindex 0x03 (3) and 0x04 (4).
deactivates (False) the sending of IO-Link events
(0x8CF1 and 0x8CF2) if the RMS value of the Z-axis is
exceeded. The thresholds can be configured in
subindex 0x05 (5) and 0x06 (6).
(True) or deactivates (False) the sending of IO-Link
events (0x8CF1 and 0x8CF2) if the RMS value of the
magnitude is exceeded. The thresholds can be
configured in subindex 0x07 (7) and 0x08 (8).
Data Value Default
type range value
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
float32 0...12500 12500
[mm/s] [mm/s]
bool True/False True
bool True/False True
bool True/False True
bool True/False True
english 29