Safety; Intended Use; General Safety Notes; Explanation Of The Warnings - Balluff BCM R15E-00 DI00 S4 Serie Betriebsanleitung

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
2

Safety

2.1

Intended use

The Condition Monitoring Sensor (BCM) together with a
machine controller (such as a PLC) or an Edge gateway
together with an IO-Link master forms a condition
monitoring system. It is intended for temporary or
permanent use installed in a machine or system and used
in the industrial sector. Flawless function in accordance
with the specifications in the technical data is ensured only
when using suitable original Balluff accessories. Use of any
other components will void the warranty.
Opening the BCM or non-approved use are not permitted
and will result in the loss of warranty and liability claims
against the manufacturer.
2.2

General safety notes

Installation and startup may only be performed by
qualified personnel with basic electrical knowledge.
Qualified personnel are persons whose technical
training, knowledge and experience as well as knowledge
of the relevant regulations allow them to assess the work
assigned to them, recognize possible hazards and take
appropriate safety measures.
The operator is responsible for ensuring that local safety
regulations are observed.
In particular, the operator must take steps to ensure that a
defect in the BCM will not result in hazards to persons or
equipment.
If defects and unresolvable faults occur in the BCM, take it
out of service and secure it to prevent unauthorized use.
6 english
2.3

Explanation of the warnings

Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could lead to damage or
destruction of the product.
CAUTION
The general warning symbol together with the signal
word CAUTION indicates a hazard which can lead to
slight or moderate injuries.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
2.4

Disposal

► Observe the national regulations for disposal.