Philips PM 5330 Handbuch Seite 59

PM 5330
OPERATING INSTRUCTIONS
r--
SPECIAL 70
SPECIAL 71
SPECIAL 72
SPECIAL 75
SPECIAL 76
SPECIAL 90
SPECIAL 91
SPECIAL 99
ARI: DK off (announcement identification),ARI Germany
ME 1/2 off (message signal), ARI USA
ARI: DK on; ARI USA: ME 1 on (message signal)
ARI: DK on; ARI USA: ME 2 on (message signal)
ARI: ARI Germany
ARI: ARI USA
reset off all special functions
reset of the instrument to a defined status (~RST) ~2
self calibration modulation/audio frequency
SPECIAL > 100 for service purposes only
~ 1 these displays can be switched off by any key except LOCAL;
the instrument return to the previous setting.
~ 2 defineded status PM 5330 (as command ~RST):
RF frequency 100 MHz frequency increment
1 MHz
output level —27 dBm
level increment 1 d6
internal AM 1 kHz sweep frequency 10 Hz
mod. depth (m) 30 % sweep width
50 kHz
RF output off FM deviation 25 kHz
2nd modulation: off
Stereo:
pilot on, preemphasis off
RDS:
RDS off, RDS phase 90°, deviation 1.25 kHz
ARI: ARI Germany, area code A, announcement DK off
counter: off, impedance 50 S2
Display of implemented options:
3 0
1 1 1
IEEE-488 bus interface or RS-232 interface
high stability option
stereo option
RDS/ARI option
instrument type PM 5330
(1 =implemented, 0 =not implemented)