Functions Of The Special Key - Philips PM 5330 Handbuch

3-32
OPERATING INSTRUCTIONS PM 5330
3.5.11 Functions of the SPECIAL Key
Press this key, followed by two digits, to set additional parameters, for example in stereo mode
and RDS/ARI. It can also be used to show the instrument version and software status.
SPECIAL 00
SPECIAL 01
SPECIAL 02
SPECIAL 10
SPECIAL 11
SPECIAL 12
SPECIAL 13
SPECIAL 14
SPECIAL 20
SPECIAL 21
SPECIAL 30
SPECIAL 31
SPECIAL 32
SPECIAL 33
SPECIAL 34
SPECIAL 35
SPECIAL 40
SPECIAL 41
SPECIAL 42
SPECIAL 43
SPECIAL 44
SPECIAL 50
SPECIAL 51
SPECIAL 52
SPECIAL 53
SPECIAL 54
SPECIAL 55
SPECIAL 56
SPECIAL 57
SPECIAL 58
SPECIAL 59
SPECIAL 60
SPECIAL 61
SPECIAL 62
SPECIAL 63
displays implemented options
~1
displays software status ~1
display test (all segment on} ~1
RF output setting same before power off
always RF OFF when switching on the instrument
RF level, unit dBm
RF level, unit dBµV
RF level, unit dBmV
counter, impedance 1 M52
counter, impedance 50 S2
reset to initial settings for stereo:
pilot on, preemphasis off
stereo, pilot off
stereo, pilot on
stereo, preemphasis off
stereo, preemphasis 50 µs
stereo, preemphasis 75
us
reset to initial settings for RDS/ARI:
RDS deviation 1.25 kHz, RDS phase 90°, ARI DK off
RDS/ARI phase: 0°
RDS/ARI phase: 80°
RDS/ARI phase: 90°
RDS/ARI phase: 100°
RDS deviation 750 Hz (minimum)
RDS deviation 1.00 kHz
RDS deviation 1.25 kHz (initial)
RDS deviation 1.50 kHz
RDS deviation 1.75 kHz
RDS deviation 2.00 kHz
RDS deviation 2.25 kHz
RDS deviation 2.50 kHz
RDS deviation 2.75 kHz
RDS deviation 3.00 kHz
RDS deviation 3.25 kHz
RDS deviation 3.50 kHz
RDS deviation 3.75 kHz
RDS deviation 4.00 kHz (maximum)