Philips PM 5330 Handbuch Seite 32

PM 5330
OPERATING INSTRUCTIONS
3-7
Display Section:
- "~" in front of the rows shows that new values can be input or selected in this field.
- ".~" shows that the step keys are active on this field. The symbol flashes to show that the
step width is displayed in this field (frequency or level) .Only now new value may be input
for the step width.
- "o" shows that the knob is active on the respective field.
SPCL
_f
,_I , j • {
W
%, ,•,
~•►_/ ,_'
MHz
~ ~
IW 1 W, / 1 ,W, IW 1 r W, r W,
kHz
O couNTER ~-
ADDRESS
~ 0
O
RF OFF
ENTER
_1.~~.~~.1.f.
d~v
SWPAM EXT FM EXT
O
STEREO L= -R
PILOT PREEMPHASIS
ON OFF 750{n OFF
-
display of carrier frequency with
unit MHz or kHz
-
display of step width
(frequency stepping)
- the text COUNTER appears if the
instrument is in counter function
-
SPCL display for special functions
-
display of output level with
unit dBm resp. dBmV or dBµV, mV or µV
-
display of step width
(level stepping)
- ADDRESS combined with two digits
shows the device address for
remote control
-
RF OFF shows that the RF output
signal is switched off
(also if reverse power protection
is tripped)
- ENTER lights during input
-
display of modulation modes:
SWP : Sweep
AM : amplitude modulation
FM : frequency modulation
EXT
FM, AM or stereo with
external modulation signal
STEREO : stereo modulation (option)
L : left channel
R : right channel
L= R
:mono
L=-R sub-channel
PILOT
oN oFF:
shows whether the pilot
carrier is switched on or off
PREEMPFiAsls : shows different settings of
75iso
µs
oFF
the preemphasis
respectively switched off