Starting The Uss Bus Scan - Siemens SIMOVERT MASTERDRIVES Betriebsanleitung

08.2009
8.5.2.2
NOTE
Siemens AG
SIMOVERT MASTERDRIVES
Downloaded from www.Manualslib.com

Starting the USS bus scan

DriveMonitor starts with an empty drive window. Via the menu "Set up
an ONLINE connection..." the USS bus can be scanned for connected
devices:
Fig. 8-8
The "Set up an online connection" menu is only valid from Version 5.2
onwards.
Fig. 8-9
During the search the USS bus is scanned with the set baudrate only.
The baud rate can be changed via "Tools
section 8.5.2.1.
Siemens Controls
6SE7087-6JD50
Operating Instructions
manuals search engine
Starting the USS bus scan
Search for online drives
Parameterization
ONLINE Settings", see
8-17