Fan Fuses - Siemens SIMOVERT MASTERDRIVES Betriebsanleitung

08.2009
X18 – Fan supply
NOTE
7.4
NOTE
Siemens AG
SIMOVERT MASTERDRIVES
Downloaded from www.Manualslib.com
Terminal Designation
1 N
2 -
3 Assigned internally
4 -
5 L
6 -
7 Assigned internally
8 -
9 -
10 Assigned internally
11 Assigned internally
12 Assigned internally
13 Assigned internally
The 1AC 230 V fan supply X18/1 must be grounded (neutral conductor
N connected to protective conductor PE).

Fan fuses

Order number
6SE7023-8ED 1
6SE7024-7ED 1
6SE7026-0ED 1
6SE7027-2ED 1
Manufacturer:
= 5 corresponds to MASTERDRIVES Motion Control
= 7 corresponds to MASTERDRIVES Motion Control Performance 2
Table 7-11
The 230 V fan must be supplied with AC 230 V externally via terminal
strip X18 1/5 on the PSU.
Siemens Controls
6SE7087-6JD50
Operating Instructions
manuals search engine
Meaning
Fan supply (neutral conductor)
Fan N via fuse F1
Fan supply (phase)
Fan L via fuse F2
Line voltage AC 380V to 480 V
Fan fuse
(F1 / F2)
FNQ-R-8/10
FNQ-R-6/10
FNQ-R-6/10
FNQ-R-6/10
FNQ-R Bussmann
Fan fuses, type D
Connecting-up
Range
230 V ± 15 % /
50/60 Hz
7-17