Starting The Uss Bus Scan - Siemens SIMOVERT MASTERDRIVES Betriebsanleitung

08.2009
8.5.2.2

Starting the USS bus scan

NOTE
Siemens AG 6SE7087-6KD50
SIMOVERT MASTERDRIVES
DriveMonitor starts with an empty drive window. Via the menu "Set up
an ONLINE connection..." the USS bus can be scanned for connected
devices:
Fig. 8-8 Starting the USS bus scan
The "Set up an online connection" menu is only valid from Version 5.2
onwards.
Fig. 8-9 Search for online drives
During the search the USS bus is scanned with the set baudrate only.
The baud rate can be changed via "Tools
section 8.5.2.1.
Operating Instructions
Parameterization
ONLINE Settings", see
8-17