Herunterladen Inhalt Inhalt Diese Seite drucken

Authentication At The Charging Station; Additional Functions; Transportation And Storage; Decommissioning The Product - Webasto Live Einbauanweisung

Vorschau ausblenden Andere Handbücher für Live:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
7.4
Authentication at the
charging station
Authorisation for starting the charging cycle
is carried out electronically using the RFID
technology or directly when connecting the
charging cable to the electric vehicle by
means of data transmission in the charging
cable according to ISO 15118.
When authorisation is by means of RFID
(Radio Frequency Identification Device),
hold the supplied RFID dongle to the sym-
bol on the charging station.
Both of the supplied RFID dongles are
already enabled for authorising at the char-
ging station. Additional RFID dongles can
be added and deleted in the configuration
interface. (see online configuration instruc-
tions: https://webasto-charging.com/
documentation).
Successful RFID authorising is signaled on
the charging station with an acoustically
and visually with display pattern C6. See
"Communication statuses on page 41"
An RFID is not needed when the data con-
nection in the charging cable is used for au-
thorisation as per ISO 15118. Of course, this
method assumes an ISO 15118-compatible
electric vehicle.
5110326C_OI-II_Webasto Live
7.5

Additional functions

Additional Webasto Live functions such as
load management, connectivity, ISO 15118,
etc. are described in the online configura-
tion instructions: https://webasto-
charging.com/documentation.
8
Transportation and
storage
Observe the ambient temperature for stor-
age during transportation. See Technical
data.
Transport the charging station only when
suitably packaged.
9
Decommissioning the
product
A decomissioning shall be carried out only
by an electrician.
u
Disconnect the power supply.
u
Electrically disconnect the charging sta-
tion.
u
Disposal: see Disposal.
10
Maintenance, cleaning,
repair

10.1 Maintenance

Have maintenance carried out only by an
electrician in accordance with local require-
ments.

10.2 Cleaning

DANGER
High voltages.
Danger of fatal electric shock. Never
clean the charging station with a
high-pressure cleaner or similar
device.
Clean the installation only with a dry
u
cloth. Do not use aggressive cleaning
agents, wax or solvents.

10.3 Repair

Unauthorised repair of the charging station
is not permitted. In case of failure, the com-
plete charging station must be replaced.
Webasto Thermo & Comfort SE reserves the
exclusive right to perform repairs to the
charging station.
The only repair to the charging station that
is permitted is to have the charging cable
replaced by an electrician.
NOTE
The charging cable can be replaced a
maximum of 4 times over the life-
time of the charging station.
11

Disposal

The symbol of the crossed-out waste
bin indicates that this electrical/elec-
tronic device must not be disposed of
in household waste at the end of its
service life. Dispose of the device free
EN
43

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis