ERBE 20132-250 Verwendungshinweis Seite 27

OBJ_DOKU-193776-005.fm Seite 27 Donnerstag, 21. März 2019 1:16 13
Connection to an APC 2 with APC socket
IMPORTANT! The adapter with art. no. 20132-249 must be con-
nected to the APC receptacle!
1. Switch on the VIO electrosurgical unit and select the basic
program.
2. Insert the APC connector (1) into the adapter (2).
2
1
3. For the connected applicator, a standard setting for mode,
power, effect, and gas flow is automatically made on the VIO
electrosurgical unit. You can change this standard setting
within a certain range as required.
Connection to an APC 3:
1. Switch on the VIO electrosurgical unit and pull up the main
menu.
2. Insert the APC connector into the APC socket on the APC 3.
3. For the connected applicator, a standard setting for mode,
effect level and gas flow is automatically made on the VIO
electrosurgical unit. You can change this standard setting
within a certain range as required.
27
: