VCS VideoJet 10 Handbuch Seite 227

Operation
Choosing the
sequence
Playback control
"
"
"
"
102
First you have to select under Partition name the partition the
recorded sequence is on.
All sequences stored on the selected partition will be listed. For
each sequence you will see a recorded order number, the start and
stop times of the recording, the length of the recording, and the
number and type of alarms captured during the sequence.
Click on any of the listed sequences to start the playback of that
recording in the viewing window.
Below the video window you can see a time slice for easy orienta-
tion. After loading the HDD-Replay page the blue bar is showing the
current day, week and year and a time scale with two-hours interval.
When a special sequence was selected the regarding time section
is shown in the lower bar, the selected sequence is symbolized by
a blue mark with a green border. The yellow slider gives the position
of the currently replayed picture within the sequence.
The time slice provides various possibilities to navigate within and
inbetween the sequences:
Change the time section displayed by clicking on the << or >> but-
ton or by moving the blue bar to the left or to the right with the
mouse button held down.
Change the graduation by clicking on the 'Zoom-in' or 'Zoom-out'
symbol. Select between intervals of three days, one day, two hours,
five minutes or one minute.
Select another sequence for replay by clicking in the corresponding
blue mark. The green border will signify the active sequence.
You can start the replay also by positioning the mouse on the yellow
strip, clicking on the mouse button and holding it down while moving
the strip on the video bar to the time position you desire. Detailed
information on date and time is provided by the indicator below the
video bar.
VideoJet 10