VCS VideoJet 10 Handbuch Seite 191

Configuration with web browser
Interface COM 2
66
Interface mode:
Select the desired protocol for the serial port.
Half-duplex mode:
Select here the mode to suit the individual application.
The parameters for the serial interface port COM2: RS232 can be
configured to suit individual requirements.
Serial port function:
Select the function for serial port 2. Select Terminal if the unit is to
be operated from a terminal. If the port is required to transmit trans-
parent data, select the entry Transparent.
Baud rate:
Select the value for the transmission rate in Bit/s.
Data bits:
The number of data bits cannot be changed.
Stop bits:
Select the number of stop bits per character.
Parity check:
Select the type of parity check.
VideoJet 10