Password Settings; Language Selection - VCS VideoJet 10 Handbuch

Configuration with web browser
Password
settings
Language
selection
40
Password level:
The access to a VideoJet 10 is generally protected with a password
in order to prevent unauthorised use of the device. The transmitters
operate with three authorisation levels: live, service and user.
In the authorisation level service, you can change all the configu-
ration settings after entering the corresponding password.
With the authorisation level user you can operate but not configure
the device. You can have a live picture or the configuration settings
displayed, but you cannot change them.
With live you can display a live video but neither change the con-
figuration nor for example control a camera.
Password:
You can define and change passwords for access to the device
when you are working with the authorisation level 'service' or if the
device is not protected with a password. You can change only one
of the three passwords at a time. In order to change the password
of another level, you have to call up this configuration page again.
Password confirm:
Enter the new password again to rule out the risk of typing errors.
Website language:
Here you select the desired language of the HTML pages.
VideoJet 10