VCS VideoJet 10 Handbuch Seite 177

Configuration with web browser
52
Recording type:
Choose here in which mode the recordings will be saved on the par-
tition.
Linear mode:
The recordings will be saved to the partition as planned in the
recording scheduler. However once the maximum storing capacity
has been met for the partition the recording process will stop. In that
case further recording on this partition is only possible if the parti-
tion is reorganised.
Ring mode:
In Ring mode the newest recordings are recorded over the oldest
recordings once the maximum storage capacity has been
achieved. E.g. if the maximum storage capacity of the partition
allows for a recording of 24 hours to be saved the recordings will
then run in a continues 24 hour loop. Only the last 24 hours of
recordings will be able to be viewed.
Partition size:
Select first how many alarms are to be recorded on the partition
(max. 128) and the alarm pre- and post-recording time lengths.
Then you can select the partition size either by choosing how long
of a recording time you require or by setting the amount of MBytes
you would like to use in this partition - in both cases the missing
value will automatically be set.
If you have chosen to use the entire memory as one partition or you
are configuring the last partition you require just click the Use all
check box. The rest of the storage capacity will then be configured
into that partition for use.
Note
When dividing the storage medium into the maximum of 8 parti-
tions, then the complete memory should be utilized. Otherwise the
remaining space can not be utilized without reorganization of the
entire storage medium.
VideoJet 10