Storing Video Sequences - VCS VideoJet 10 Handbuch

Operation

Storing video sequences

"
"
Image resolution
100
You can store video sequences either on the hard drive of your
computer or locally on the device. For the local recording via the
CompactFlash interface you can use standard CompactFlash
cards or MicroDrives with a capacity of up to 1 GB. The video
sequences are stored in MPEG format.
Click on the symbol MPEG Recording to start recording a video
sequence. The storage location depends on the configuration of the
VideoJet 10 (see page 71).
The recording starts immediately. While storing the red dot
in the symbol MPEG Recording is blinking.
Click on the symbol MPEG Recording once more to stop the
recording.
Note
Use the VCS MPEG Player to display the recorded video
sequences. You can find the latest version of the MPEG Player on
the supplied software CD. It is also available from your VCS service
centre or from the Internet via the download site under
www.vcs.com.
For further information on installing the MPEG decoder see
page 95.
Video sequences will be recorded with the resolution specified for
the encoder that is chosen as source for the Livepage video (see
pages 44 et sqq. and 71).
VideoJet 10