VCS VideoJet 10 Handbuch Seite 209

Configuration with web browser
Alarm
connections
84
Options are provided to specify the behavior of the VideoJet 10 in
the event of an alarm.
The VideoJet 10, for example, can establish a connection to a pre-
defined IP address (VideoJet 10 receiver or PC with receiver soft-
ware) automatically.
Connect on alarm:
Select On, to automatically establish a connection to a predefined
IP address in the event of an alarm.
Number of video receiver address:
The VideoJet 10 can store up to 10 different alarm IP addresses. In
case of an alarm a connection will be established with the first
address. If it is not possible the next following address will be con-
tacted until a connection can be set up. Select the ranking position
of the IP address here.
Alarm IP address:
Enter the IP address here to which a connection is to be established
in the event of an alarm.
Remote password:
Enter here the 'user'-password for the remote device if necessary.
Live video auto-connect:
Select the option On here if it is required to reestablish a connection
to the previously specified IP address after each restart, e.g. after a
connection breakdown or network dropout.
VideoJet 10