VCS VideoJet 10 Handbuch Seite 187

Configuration with web browser
"
"
"
"
"
"
62
Take note of the amplitude of the movement signal displayed in the
window over a long period and at all light levels likely to be encoun-
tered in practice.
Move the mouse pointer onto the blue line.
Holding the left mouse button pressed, move the blue line to the
required position.
Motion tracking
For certain applications, it can make sense to generate an alarm
only if movement takes place in a particular direction. You can acti-
vate the motion detection and select the direction of movement
required to generate an alarm.
Select here the option On, in order to activate the motion tracking
feature of the video sensor.
Tracker
In the Tracker field you see an arrow, which indicates the current
motion in the video image. By means of check boxes in the four cor-
ners, the desired direction can be activated. If, for example, all
movements to the "left" and "upwards" are to activate an alarm,
then mark the top left corner. If all movement to the "left" is to acti-
vate the alarm, then check the left upper and the lower left corners.
Note the movements indicated by the arrow in the video image over
a long period and at all light levels likely to be encountered in prac-
tice.
Click the check box in order to activate the corresponding direc-
tional component.
VideoJet 10