VCS VideoJet 10 Handbuch Seite 207

Configuration with web browser
Timer server
Monitor settings
82
The VideoJet 10 can receive a time signal from a TIME server (NTP
server) and use it to set the internal clock. The device calls up the
time signal automatically every two hours.
Time zone:
Here you select the current time zone.
Time server IP address:
Enter the IP address of a TIME server here.
Video monitor name:
Enter the desired monitor name here. The monitor name is used for
easier remote identification of the monitor location. Enter here an
unambiguous and clear name.
Video output standard:
Choose here the correct output standard in dependence of the
monitor used.
Warning!
Ensure to set the correct video norm in order to avoid damages to
the monitor.
VideoJet 10