VCS VideoJet 10 Handbuch Seite 212

Interface COM 1
VideoJet 10
The parameters for the serial interface port COM1: RS232/485 can
be configured to suit individual requirements.
Serial port function:
Select one of the controllable devices from the list. If the port is
required to transmit transparent data, select the entry Transparent.
Note
After selecting a device, the remaining parameters in the window
are automatically set and should not be altered.
Baud rate:
Select the value for the transmission rate in Bit/s.
Data bits:
The number of data bits cannot be changed.
Stop bits:
Select the number of stop bits per character.
Parity check:
Select the type of parity check.
Configuration with web browser
87