VCS VideoJet 10 Handbuch Seite 208

Audio
configuration
Alarm sources
VideoJet 10
Activate audio:
Decide here if you want to receive an audio stream along with the
MPEG-4 video. Transmission of audio requires additional band-
width of approx. 80 kBit/s.
Note
Ensure that audio is activated in the transmitter audio configuration,
too (see page 47).
The possible alarm activator of the VideoJet 10 can be configured.
Alarm input 1:
Select the option On here in order to activate the alarming by
means of an external alarm sensor.
Additionally, it is also possible to select if the alarm is to be activated
by an Active high or Active low voltage level.
Enter a name for the alarm input into the text field which will be dis-
played onscreen in case of alarm.
Configuration with web browser
83