VCS VideoJet 10 Handbuch Seite 216

"
"
"
"
"
"
"
VideoJet 10
This allows a device to be remotely serviced and updated without a
technician having to modify the device installation on site.
The latest firmware can be obtained from your VCS Service centre
or from the Internet via the download site under www.vcs.com.
Warning!
Before starting the firmware upload, ensure that you have selected
the correct upload file! An upload of other files can result in the
device being no longer addressable and having to be replaced.
On no account interrupt the installation of the firmware. An interrup-
tion will result in damage to the flash EPROM. This can result in the
device being no longer addressable and having to be replaced.
First, store the update files to the hard disk.
Enter the complete directory path for the update file in the text field
or click on the button Durchsuchen... to locate and select the file.
Click on the button Upload to begin the transmission to the unit.
The progress of the download can be monitored from the status
messages and from the progress bar.
On completion of a successful upload, the unit will automatically
restart.
If the LED Power flashes red and green alternately, the upload has
been unsuccessful and must be restarted. In order to perform the
upload, it is necessary to change over to a special page:
Enter /main.htm in (e. g. 192.168.0.12/main.htm) in the
address field of the browser behind the IP address of the unit.
Restart the upload process.
Configuration download:
You can store the configuration setting of the device on a PC.
Click on the button Download. A dialog window is opened.
Follow the instructions in the dialog window to save the settings.
Configuration upload:
You can upload stored configuration settings from a PC.
Configuration with web browser
91