VCS VideoJet 10 Handbuch Seite 221

Operation
"
"
Establishing
the connection
"
"
96
Insert the CD into the CD-ROM drive of the computer. The CD
runs automatically. If the CD does not start automatically, open the
root directory of the CD in Windows Explorer and double click on
MPEGAx.exe.
Follow the onscreen instructions.
To use the VideoJet 10 on a network, it must be provided with an IP
address.
The following address is factory installed:
Transmitter: 192.168.0.1
Receiver: 192.168.0.2
Start up the web browser.
For the URL, enter the IP address of the VideoJet 10.
The Livepage with the video image will be displayed.
If the connection is not established, the selected transmitter is
already occupied with a different destination. Depending upon net-
work configuration and individual units, a maximum of five receivers
can receive images simultaneously from one transmitter.
VideoJet 10