Configuration with web browser
Multicast settings
68
Warning!
Multicast operation is only possible using the UDP protocol. The
TCP protocol does not support any multicast connection.
Multicast streaming:
Along with a 1:1 connection between a transmitter and a receiver,
(unicast) the VideoJet 10 provides the option of connecting a num-
ber of receivers to simultaneously receive the video signal. This is
achieved either by a duplication of the data stream in the unit with
subsequent distribution to a number of receivers (multi-unicast) or
by distribution of a single data stream on the network itself to a
number of receivers in a defined group (multicast).
Select here the option On in order to activate the multicast function.
Note
Requirement for multicast operation is a multicast compliant net-
work with implementation of the UDP protocol and the IGMP proto-
col. Other group membership(management) protocols are not
supported. The TCP protocol does not support any multicast
connection.
VideoJet 10