VCS VideoJet 10 Handbuch Seite 167

Configuration with web browser
Timer server
Camera name
42
The VideoJet 10 can receive a time signal from a TIME server (NTP
server) and use it to set the internal clock. The device calls up the
time signal automatically every two hours.
Time zone:
Here you select the current time zone.
Time server IP address:
Enter the IP address of a TIME server here.
Camera name:
Enter the required camera name here. The camera name is used
for easier remote identification of the camera location, e.g. in event
of an alarm call. Enter here an unambiguous and clear name
VideoJet 10