Alarm Connections - VCS VideoJet 10 Handbuch

Configuration with web browser
Alarm
connections
58
Enter a name for the alarm input into the text field which will be dis-
played onscreen in case of alarm.
Options are provided to specify the behavior of the VideoJet 10 in
the event of an alarm.
The VideoJet 10, for example, can establish a connection to a pre-
defined IP address (VideoJet 10 receiver or PC with receiver soft-
ware) automatically.
Connect on alarm:
Select On, to automatically establish a connection to a predefined
IP address in the event of an alarm.
Number of video receiver address:
The VideoJet 10 can store up to 10 different alarm IP addresses. In
case of an alarm a connection will be established with the first
address. If it is not possible the next following address will be con-
tacted until a connection can be set up. Select the ranking position
of the IP address here.
Alarm IP address:
Enter the IP address here to which a connection is to be established
in the event of an alarm.
Remote password:
Enter here the 'user'-password for the remote device if necessary.
VideoJet 10