VCS VideoJet 10 Handbuch Seite 184

Motion detector
VideoJet 10
Live video auto-connect:
Select the option On here if it is required to reestablish a connection
to the previously specified IP address after each restart, e.g. after a
connection breakdown or network dropout.
The VideoJet 10 contains an integrated video sensor, which on the
basis of the video processing can register changes in the video sig-
nal. These changes are primarily initiated by movement in the field
of view of the camera.
The sensitivity of the video sensor can be adjusted, so that an alarm
is generated only if a given threshold is exceeded.
In order for the alarm to operate, the following conditions must be
fulfilled:
The motion detection must be activated.
!
At least one cell must be activated.
!
Individual parameters must be matched to the environmental
!
conditions and to the required responses.
The sensitivity must be set to a value >0.
!
Configuration with web browser
59