Setting Remote Control Codes - Yamaha RX-V3800 Bedienungsanleitung

Selecting a component to be controlled
You can select a component to be controlled
independently of the input source selected with the input
selector buttons.
Press B SELECT k / n repeatedly to select the
desired component.
The name of the component to be controlled appears in the
display window (B) on the remote control.
Controlling optional components
(Option mode)
"OPTN" is an optional component control area that can be
programmed with remote control functions independently
from any input source. This area is useful for
programming commands that are to be used only as a part
of a macro function or for components that do not have a
valid remote control code.
To select the option mode, press B SELECT n
repeatedly until "OPTN" appears in the display
window (B) on the remote control.
Note
You cannot set a remote control code for the optional area. See
page 107 to program buttons operated within this component
control area.

Setting remote control codes

You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area. For a complete list of available remote
control codes, refer to "List of remote control codes" at
the end of this manual.
The following table shows the default component
(Library: component category) and the remote control
code for each input area.
Remote control code default settings
Library
Input area (component
category)
TAPE
NET/USB TUNER
TUNER TUNER
CD CD
CD-R CD-R
MULTI CH
DVD
IN
MD/TAPE MD
DVD DVD
BD/HD DVD DVD
PHONO TV
DTV/CBL TV
DVR DVR
VCR VCR
V-AUX/
TUNER
DOCK
Note
You may not be able to operate your Yamaha component even if a
Yamaha remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
Remote control features
Default
Manufacturer
code
— 2604
Yamaha 2607
Yamaha 2602
Yamaha 2300
Yamaha 2400
Yamaha 2100
Yamaha 2500
Yamaha 2100
Yamaha 2100
— —
— —
Yamaha 2807
— —
Yamaha 2606
105
En