Setting Remote Control Codes - Yamaha RX-V1900 Bedienungsanleitung

■ Selecting a component to be controlled
You can select a component to be controlled
independently of the input source selected with the input
selector buttons (3).
Press 5 SELECT l / h repeatedly to select the
desired component.
The name of the component to be controlled appears in the
display window (4) on the remote control.
■ Controlling optional components
(Option mode)
"OPTN1" and "OPTN2" are optional component control
areas that can be programmed with remote control
functions independently from any input source. These
areas are useful for programming commands that are to be
used only as a part of a macro function or for components
that do not have a valid remote control code.
To select the option mode, press 5 SELECT l /
h repeatedly until "OPTN1" or "OPTN2" appears
in the display window (4) on the remote control.
OPTN1
Note
You cannot set a remote control code for the optional areas. See
page 85 to program buttons operated within this component
control area.
DVD
OPTN2
or

Setting remote control codes

You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area. For a complete list of available remote
control codes, refer to "List of remote control codes" at
the end of this manual.
The following table shows the default component
(Library: component category) and the remote control
code for each control area.
Remote control code default settings
Library
Control
(component
area
category)
MULTI DVD
V-AUX —
PHONO —
DOCK SOURCE
BD
BD
HD DVD
DVD DVD
CD CD
MD
CD-R
CD-R
CBL
—
SAT
TV —
DVR DVR
VCR —
TUNER SOURCE
—
A
—
B
USB SOURCE
Note
You may not be able to operate your Yamaha component even if
a Yamaha remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
1
Check the remote control code for your
component in advance.
For a complete list of available remote control codes,
see "List of remote control codes" at the end of this
manual.
2
Set the operation mode selector on the
remote control to ESOURCE.
If you want to set the remote control code for "TV",
set the operation mode selector to ETV.
Remote control features
Default
Manufacturer
code
Yamaha 04306
— —
— —
Yamaha 00012
Yamaha 04706
Yamaha 04306
Yamaha 01205
Yamaha 01405
— —
— —
Yamaha 00707
— —
Yamaha 00012
— —
— —
Yamaha 00012
83
En