Herunterladen Inhalt Inhalt Diese Seite drucken

Setting Remote Control Codes - Yamaha RXV-1700 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für RXV-1700:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 262
REMOTE CONTROL FEATURES
■ Selecting a component to be controlled
You can select a component to be controlled
independently of the input source selected with the input
selector buttons.
Press SELECT k / n repeatedly to select the
desired component.
The name of the component to be controlled appears in the
display window on the remote control.
SELECT
■ Controlling optional components
(Option mode)
"OPTN" is an optional component control area that can be
programmed with remote control functions independently
from any input source. This area is useful for
programming commands that are to be used only as a part
of a macro function or for components that do not have a
valid remote control code.
To select the option mode, press SELECT n
repeatedly until "OPTN" appears in the display
window on the remote control.
SELECT
Note
You cannot set a remote control code for the optional area. See
page 98 to program buttons operated within this component
control area.
96
En

Setting remote control codes

You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area. For a complete list of available remote
control codes, refer to "LIST OF REMOTE CONTROL
CODES" at the end of this manual.
The following table shows the default component
(Library: component category) and the remote control
code for each input area.
Remote control code default settings
Library
Input area
(component
category)
TAPE
TUNER
PHONO
TV
TUNER
TUNER
CD
CD
MULTI CH
DVD
INPUT
V-AUX/
TUNER
DOCK
CBL/SAT
CABLE
MD/TAPE
MD
CD-R
CD-R
DTV
TV
VCR 1
VCR
DVR/VCR2
DVR
DVD
DVD
Note
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is preset as listed above.
In this case, try setting another YAMAHA remote control code.
1
Set the operation mode selector to SOURCE
and then press an input selector button,
to select the input area you want to set
up.
AMP
SOURCE
TV
Default
Manufacturer
code
YAMAHA
2700
YAMAHA
2607
YAMAHA
2602
YAMAHA
2300
YAMAHA
2100
YAMAHA
2606
YAMAHA
2500
YAMAHA
2400
YAMAHA
2807
YAMAHA
2100
PHONO
TUNER
CD
MULTI CH IN
V - AUX/DOCK
CBL/SAT
MD/TAPE
CD-R
DVR/VCR 2
DTV
VCR 1
DVD
or

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis