Remote Control Operation - Yamaha RX-V3800 Bedienungsanleitung

Using Network/USB features
The following procedure shows the basic steps to navigate
the network and USB menus. See pages 63 to 65 for
details about each sub input source.
Note
"Please wait" may appear whenever it takes time for
communication. This is not a system malfunction. Wait for a
while.
Before performing the following operations, set the operation
mode selector on the remote control to D SOURCE.
Press 1 NET/USB on the remote control to
1
select "NET/USB" as the input source.
The cursor on the left of the NET/USB indicator
lights up in the front panel display, and the contents
previously played for the corresponding sub input
source of NET/USB is automatically played.
Lights up
NET/USB V-AUX VCR DVR DTV/CBL
Press J DISPLAY to display the top NET/
2
USB menu.
The following display appears on the video monitor.
If any other screen appears on the video monitor,
press G MENU on the remote control repeatedly
until the top NET/USB menu appears.
Top
PC/MusicCAST
Internet Radio
USB
3
Press 4 k / n to select the desired sub input
source and then press 4 h or 4 ENTER.
y
You can also select the desired sub input source by pressing
7 NET RADIO, 7 USB or 7 PC/MCX when "NET/
USB" is selected as the input source. This unit automatically
starts playback of the last selected music file, Internet Radio
station, or Podcast when you press 7 NET RADIO,
7 USB or 7 PC/MCX.
62
En
DVD BD/HD DVD
4
Press 4k / n / l / h to select the desired
song or Internet Radio station.
• Press 4k / n to select the desired menu.
• Press 4h to enter the selected menu.
• Press 4l to return to the previous menu level.
y
• ">" in the right corner of each menu line indicates that
there is a submenu available in the next menu level.
• You can also press 4ENTER or G MENU to enter the
selected menu or to return to the previous menu level.
Press 4 ENTER to play the selected song or
5
to listen to the selected station.
y
• See page 60 for details about the functions of the play
information display.
• Some items do not appear in the play information display
depending on the selected sub input source.
• You can set the time for which the GUI screen of the
network/USB is displayed on the video monitor by using
the "On Screen" parameter in "Manual Setup" (see
page 87).

Remote control operation

Before performing the following operations, set the operation
mode selector on the remote control to D SOURCE and then
press 1NET/USB.
Button
3 TITLE
Bookmark
4 k
Up
n
Down
l
Previous menu
h
Subsequent menu
5 MEMORY
Memory
6 1 – 8
Numeric buttons (1-8)
7 NET RADIO Select "NET RADIO"
USB Select "USB"
b
Skip backward ("PC/MCX" and "USB" only)
a
Skip forward ("PC/MCX" and "USB" only)
PC/MCX
Select "PC/MCX"
s
Stop
p
Play
G MENU
Previous menu
J DISPLAY
Display
*1 Press and hold to store your favorite Internet Radio stations
with bookmarks (see page 64).
*2 Press to assign or recall the preset items (see page 65).
Function
*1
*2