Assembling The Supplied Am Loop Antenna; General Connection Information - Yamaha RX-V3800 Bedienungsanleitung

4
Connect the supplied AM loop antenna and
indoor FM antenna to this unit.
Indoor FM antenna
Note
The types of the supplied indoor FM antenna and the FM
antenna terminal of this unit are different depending on the
models.
Connecting the wire of the AM loop antenna
Insert
Open the lever
y
The wire of the AM loop antenna does not have any polarity
and you can connect either end of the wire to AM or GND
terminal.

Assembling the supplied AM loop antenna

5
AM loop antenna
• Using other kinds of speaker combinations
• Connecting a video monitor via various ways of
connection
• Connecting a DVD player via various ways of
connection
• Connecting a DVD recorder or a digital video
recorder
• Connecting a set-top box
• Connecting a CD player, an MD recorder, or a
Close the lever
turntable
• Connecting an external amplifier
• Connecting a DVD player via multi-channel analog
audio connection
• Connecting a Yamaha iPod universal dock
• Using the REMOTE IN/OUT jacks
• Using the VIDEO AUX jacks on the front panel
• Connecting FM/AM antennas
• Connecting this unit to your network
• Connecting a USB device
• General information on jacks and cable plugs
• General information on HDMI
• Speaker impedance settings
Connect the supplied power cable to AC IN of
this unit and then plug the power cable and
other components into the AC wall outlet.
y
• This unit is equipped with AC OUTLET(S) that provide(s)
power to other components (except Korea model). See
page 32 for details.
• (Asia model only) Select one of the supplied power cables
suitable for the type of AC wall outlet in your location
before plugging this into the AC wall outlet.
For further connections

General connection information

Quick start guide
P. 13
P. 23
P. 25
P. 26
P. 26
P. 27
P. 28
P. 29
P. 30
P. 30
P. 30
P. 32
P. 31
P. 65
P. 20
P. 21
P. 33
9
En