Yamaha RX-V3800 Bedienungsanleitung Seite 91

Measure for the speaker size
The woofer section of a speaker is
– 16 cm (6.5 in) or larger: large
– smaller than 16 cm (6.5 in): small
Front (Front speakers)
Choice
Large Select this setting when the front speakers are
large.
Small Select this setting when the front speakers are
small.
Notes
• When "Bass Out" is set to "Front", the LFE signals found in
bitstream sources, the low-frequency signals of the front left
and right channels, and the low-frequency signals of other
speakers set to "Small" are all directed to the front left and right
speakers regardless of the "Front" setting.
• When "Bass Out" is set to "Front", you can select only "Large"
in "Front". If the value of "Front" is set to other than "Large" in
advance, this unit change the value to "Large" automatically.
Center (Center speaker)
Choice
Large Select this setting when the center speaker is
large.
Small Select this setting when the center speaker is
small.
None
Select this setting when you do not use the
center speaker. The center channel signals are
directed to the front left and right speakers.
Surround (Surround left/right speakers)
Choice
Large Select this setting when the surround speakers
are large.
Small Select this setting when the surround speakers
are small.
None Select this setting when you do not use the
surround speakers. This unit is set to the Virtual
CINEMA DSP mode (see page 50), and
"Surround Back" is automatically set to "None".
y
See page 15 for the connection information of the surround
speakers.
Descriptions
Descriptions
Descriptions
Graphical user interface (GUI) screen
Surround Back
(Surround back left/right speakers)
Choice
Large x1 Select this setting when the single surround back
speaker is large.
Large x2 Select this setting when the surround back left
and right speakers are Large.
Small x1 Select this setting when the single surround back
speaker is small.
Small x2 Select this setting when the surround back left
and right speakers are small.
None Select this setting when you do not use the
surround back speakers. The surround back
channel signals are directed to the surround left
and right speakers.
y
See page 15 for the connection information of the surround
speakers.
Presence (Presence speakers)
Use this feature if you want to use the presence speakers
connected to this unit.
Choice
Yes Select "Yes" when you use the presence
speakers.
None Select "None" when you do not use the presence
speakers.
Notes
• If you set "Presence" to "No", you cannot activate the CINEMA
DSP 3D mode (see page 50).
• "Dialogue Lift" is available only when "Presence" is set to
"Yes" (see page 72).
Bass Out (Bass out)
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
LFE signals output
Subwoofer and speakers
Choice
Subwoofer
Both Output
SWFR Output
Front No output
Descriptions
Descriptions
Front Other
speakers speakers
Output No output
No output No output
Output No output
89
En