Yamaha RX-V3800 Bedienungsanleitung Seite 79

Decoder parameter descriptions
Decoder parameter
Panorama
("PLIIx Music" and "PLII
Music" only)
Center Width
("PLIIx Music" and "PLII
Music" only)
Dimension
("PLIIx Music" and "PLII
Music" only)
Center Image
("Neo:6 Music" only)
Initialize (Program parameters initialization)
Use this feature to initialize the parameter of the selected sound field program.
Choices: No, Yes
• Select "Yes" and then press 4ENTER to set the program parameters to the factory default settings.
• Select "No" (or press 4l) to cancel the program parameter initialization.
y
Use "DSP PARAM" of "INITIALIZE" in "Advanced setup" to initialize the parameters of each sound field program within a sound
field program group (see page 123).
Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as
well as the front speakers for a wraparound effect.
Choices: Off, On
Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely
towards the center speaker or towards the front left and right speakers. A larger value moves the center
channel output towards the front left and right speakers.
Control range: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front
or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as necessary.
Control range: 0.0 (center channel sound is output only from the front left and right speakers) to
1.0 (center channel sound output only from the center speaker)
Initial setting: 0.3
SB. Room Size
Dialogue Lift
Initialize
Graphical user interface (GUI) screen
Features
No
Yes
77
En