Sound Field Programs; Selecting Sound Field Programs; Sound Field Program Descriptions - Yamaha RX-V3800 Bedienungsanleitung

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a Yamaha digital sound field processing
(DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
• The Yamaha CINEMA DSP sound field program are compatible with all Dolby Digital, DTS, Dolby Surround, Dolby TrueHD, and
DTS-HD Master Audio sources.
• The Yamaha HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in
actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from
the front, back, left and right.

Selecting sound field programs

Rotate the O PROGRAM selector (or set the
operation mode selector to D AMP and then
press one of the sound field selector buttons (O)
repeatedly).
The name of the selected sound field program appears in
the front panel display and in the short message display.

Sound field program descriptions

y
Select a sound field program based on your listening preference, not merely on the name of the program, etc.
Remote control
button
MOVIE
8
This program clearly reproduces the finely elaborated sound design of the latest science fiction and special effects-featuring movies. You can
enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialog, sound effects and background
music.
Decoder Type
DSP Level
Available sound field parameters (see page 73)
Sound field indicators
Presence sound field
Surround left
sound field
Surround back sound field

Sound field programs

Category of the Name of the
program program
MOVIE Sci-Fi
Init. Delay Sur. Init. Delay
Room Size Sur. Room Size
Listening position
Surround right
sound field
Notes
• When you select an input source, this unit automatically selects
the last sound field program used with the corresponding input
source.
• Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the
input source (see page 42) or when this unit is in the Pure Direct
mode (see page 51).
• When you play back DTS 96/24 sources with any sound field
program, this unit applies the selected program without
activating the DTS 96/24 decoder.
• Sampling frequencies higher than 48 kHz are sampled down to
48 kHz or lower and then sound field programs are applied.
y
You can select the desired sound field programs and setting the
parameters by using GUI screen. See page 71 for details.
Created sound
fields
SB. Init. Delay
SB. Room Size
Sound field programs
CINEMA DSP
or
HiFi DSP
Dialogue Lift
Program description
45
En