Selecting Audio Input Jacks (Audio Select); Selecting The Multi Ch Input Component; Using Your Headphones - Yamaha RX-V3800 Bedienungsanleitung

Playback
Selecting audio input jacks
(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend setting the audio input jack select to "AUTO"
in most cases.
• You can adjust the default the audio input jack select of this unit
by using "Audio Select" in "Option" (see page 95).
• You can also set the audio input jack select setting in "Audio
Select" in "Input Select" (see page 79).
Rotate the C INPUT selector (or press one
1
of the input selector buttons (1)) to select
the desired input source.
Press D AUDIO SELECT (or 0 AUDIO
2
SEL) repeatedly to select the desired Audio
input jack select setting.
Available input sources
NET/USB V-AUX VCR DVR DTV/CBL
A . S E L :
AUTO
Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI
Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT
Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.
ANALOG
Selects only analog signals. If no analog
signals are input, no sound is output.
Note
This feature is not available when no digital input jack
(OPTICAL, COAXIAL and HDMI) are assigned. Use "I/O
Assignment" in "Input Select" to reassign the respective input
jack (see page 79).
42
En
DVD BD/HD DVD
A U T O
Currently selected Audio
input jack select setting
Selecting the MULTI CH INPUT
component
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 29) as the input
source.
Rotate the C INPUT selector on the front panel
to select MULTI CH (or press 1 MULTI CH IN).
y
Use "MULTI CH" menu in "Input Select" to set the parameters
for MULTI CH (see page 80).
Note
Sound field programs and the Compressed Music Enhancer mode
cannot be selected when the component connected to the MULTI
CH INPUT jacks is selected as the input source (see page 45).

Using your headphones

Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
AUDIO TONE REC OUT/
SELECT CONTROL ZONE2 A/B/C/D/E
INPUT
STRAIGHT
MAIN ZONE
EFFECT
YPAO SILENT CINEMA
PROGRAM OPTIMIZER
MIC PHONES
ON
OFF
MASTER
y
When you select a sound field program, SILENT CINEMA mode
activates automatically (see page 50).
Notes
• When you connect headphones, no signals are output at the
speaker terminals.
• When the component connected to the MULTI CH INPUT
jacks of this unit is selected as the input source, only the signals
input at the MULTI CH INPUT FRONT jacks are output from
the connected headphones.
• All digital multi-channel audio signals (except DSD signals) are
mixed down to the left and right headphone channels.
PURE DIRECT
PRESET/ MEMORY TUNING
PRESET/TUNING TUNING FM/AM MAN'L/AUTO FM MODE SLEEP
EDIT DISPLAY
ZONE ON/OFF ZONE CONTROLS
MULTI ZONE
ZONE 2 ZONE 3
S VIDEO VIDEO L AUDIO R OPTICAL
VIDEO AUX USB
VOLUME