Reely 1998713 Bedienungsanleitung Seite 65

Figure 27 shows the fuselage with mounted holder and
inserted quadrocopter. You can also see the plastic clip
attached to the holder.
For better visibility, the previously mounted
wing (see Figure 24) has been dismantled
once again for Figure 27.
The edge of the holder (see arrow in Figure 23) as well
as the on/off switch on the quadrocopter point upwards.
Finally, attach the propeller guard (Figure 28). Bend it
into the shape of a semicircle and insert into the open-
ings of the wing.
When installing the propeller guard, make sure the
locking hooks under the wing are secure. The frame
must be secure so that it cannot come loose.
The assembly is complete.
Figure 27
Figure 28
65