Reely 1998713 Bedienungsanleitung Seite 57

Bob function
The bob function allows you to move the quadrocopter forwards and backwards (see Figure 16). Use the right joystick
for steering (see also Figure 9, no. 6).
The quadrocopter's "front" is on the side where the three white LEDs are located; "back" is on the side with
two red LEDs and the on/off switch.
If you push the joystick forwards slightly, the electronics in the quadrocopter change the propeller speeds so that the
model tilts slightly forwards and thus also flies forwards.
If you steer backwards on the transmitter, the opposite propeller speed changes occur and the model flies backwards
(see arrows in Figure 16).
Figure 16
57