Installing The Filter Cartridge; Aligning The Appliance - Gaggenau ry 495 Gebrauchsanleitung

Installing the filter cartridge

The water filter is on the top right in the fridge.
1 Press tab and fold cover downward.
2 Unscrew blue bypass cover by turning anticlockwise.
Retain for later use.
3 Remove the new filter cartridge packaging.
4
Install filter cartridge and turn clockwise until it
engages.
5 Close cover.

Aligning the appliance

For proper functioning, the appliance must be set level
using a spirit level.
Note:
For the door to close tightly, the appliance should stand
6 mm lower in back than in front.
An improperly aligned appliance can result in water
running out of the ice maker, ice cubes of different sizes
being made, or the doors not closing properly.
1
Place appliance at the intended location.
B
2
Using a 3/8" (9.5 mm) Allen key, turn the two
adjusting screws (A) to raise or lower the fridge
in front.
3 Using an Allen key, turn the two adjusting screws (B)
to raise or lower the fridge in back.
4 Using a spirit level, check:
whether the appliance is level on the sides,
and whether the appliance stands 6 mm lower in
back.
Standard gauge: one half of a spirit level bubble.
A B A
43