Gaggenau ry 495 Gebrauchsanleitung Seite 44

5 If the doors are at an unequal height after aligning the
appliance, they are to be adjusted as described
below:
Determine which door must be raised.
On the side that is be raised, turn adjusting
screws (A) clockwise until the doors exhibit the same
height.
If a door can be raised no further, then the other door
must be lowered by turning the appropriate adjusting
screw (A) anticlockwise.
6 Check the alignment again using the spirit level.
7 Turn feet (C) clockwise until they stand firmly on the
floor.
8 Push in the provided base panel from the front and
fasten from above with the screws provided.
44
C A A C