Temperature Alarm; Door Alarm - Gaggenau ry 495 Gebrauchsanleitung

Temperature Alarm

A temperature alarm is triggered if the temperatures in the
fridge or freezer compartment are too high. The LED
flashes.
Possible causes:
Power failure
D
Storage of larger quantities of fresh goods
D
Appliance malfunction.
D
In an alternating fashion, the instantaneous temperature
and the highest temperature that was reached when the
malfunction occurred appear in the corresponding
display.
If the alarm/audio signals are switched on during the
Setup Mode, then an alarm sounds.
To switch off the Temperature Alarm:
Press Temperature Alarm button.
The alarm signal stops. The LED continues to flash. In the
display, the two temperatures continue to be displayed in
an alternating fashion until the set temperature is
reached.
50

Door Alarm

A Door Alarm is triggered if an appliance door is left open
for more than 5 minutes. The LED flashes.
If the alarm/audio signals are switched on during the
Setup Mode, then an alarm sounds.
To switch off the Door Alarm:
Close door or press Door Alarm button.
The alarm signal stops. The LED extinguishes.