Special Instructions; Removal Of Iodine Stains - Stryker SM304 Bedienungsanleitung

SPECIAL INSTRUCTIONS

Velcro: to clean and disinfect Velcro, saturate with disinfectant, rinse with water, and allow it to evaporate .
Soils or Stains: use neutral soaps and warm water . Do not use harsh cleansers, solvents or abrasive cleaners .
Hard-To-Clean Spots: use standard household/vinyl cleansers and a soft bristle brush on troublesome spots or stains .
Pre-soak heavy, dried-on soil .
Laundering is NOT RECOMMENDED: laundering may substantially decrease the useful life of the mattress .
DO NOT STEAM CLEAN, PRESSURE WASH, HOSE OFF OR ULTRASONICALLY CLEAN MATTRESSES .
Using these methods of cleaning is not recommended and may void this product's warranty .

REMOVAL OF IODINE STAINS

1 . Make a solution of 1−2 Tablespoons Sodium Thiosulfate in a pint of warm water and use it to wipe the stained area .
Clean the stain as soon as possible after it occurs . If stains are not immediately removed, allow solution to soak or
stand on the surface before wiping .
2 . Rinse surfaces which have been exposed to the solution with clear water before returning mattress to service .
NOTE
Failure to follow the above directions when using these types of cleaners may void this product's warranty .
www.stryker.com
Cleaning
1025-009-005 REV B
Return To Table of Contents
1-25