Back View; Unpacking And Installing The Leep Precision Smoke Evacuator; Unpacking And Installing The Leep Precision Generator - Cooper Surgical LEEP PRECISION LP-10-120 Bedienungsanleitung

Isometric View
LEEP PRECISION Cart
LEEP PRECISION
Generator
Handle Bar
Shelves
Locking Casters (wheels)

2.2 Unpacking and Installing the LEEP PRECISION Smoke Evacuator

After unpacking the LEEP PRECISION Smoke Evacuator:
1 . Undo the Velcro
®
2 . Plug in the connector [located at (B) in Figure 1] from the LEEP PRECISION Integration Unit to the rear of the
LEEP PRECISION Smoke Evacuator .
3 . Put the LEEP PRECISION Smoke Evacuator in the designated area (slide in place) .
4 . Refasten the Velcro strap .
Install the LEEP PRECISION Generator next .

2.3 Unpacking and Installing the LEEP PRECISION Generator

After unpacking the LEEP PRECISION Generator:
1 . Turn on the power switch on the LEEP PRECISION
Generator (put the switch in the ON position (" ")) .
The LEEP PRECISION Generator can now be placed
into the sleeve which hangs over the LEEP PRECISION
Smoke Evacuator .
2 . Rotate the cart so the handle is in the front .
The plug on the LEEP PRECISION Integration Unit
(inside the sleeve) fits into the receptacle of the LEEP PRECISION Generator. Gently press the LEEP
PRECISION Generator into place .
strap located at the rear of the LEEP PRECISION Cart .
Main Power
Switch
To the outlet
(A)
Hooks (1 of 4)
Velcro for the LEEP
PRECISION
Smoke Evacuator
LEEP PRECISION
Smoke Evacuator
plug located here
in the rear
Figure 1
7

Back View

LEEP PRECISION
Integration Unit
Connector for
the LEEP
PRECISION
Smoke
Evacuator
LEEP
PRECISION
Smoke
Evacuator
(B)