Description; Introduction; Leep Precision Generator Description; Leep Precision Smoke Evacuator Description - Cooper Surgical LEEP PRECISION LP-10-120 Bedienungsanleitung

Section 1 Description

1.1 Introduction

The LEEP PRECISION
LP-10-120 Generator, 120 VAC
LP-10-220 Generator, 230 VAC

1.2 LEEP PRECISION Generator Description

The LEEP PRECISION Generator has the following features:
– Isolated power output and LED display located in the front for power selection, delivery, and ease of
use
– Flush faceplate membrane to facilitate operation and cleaning
– Microprocessor-based controls for increased precision, accuracy, reproducibility, and safety
– A choice of CUT, BLEND, and COAG waveforms to accommodate subtle differences
in technique and electrode performance
– Hand or foot activation for precise operation
– Patient return monitor that disables power automatically if Patient Return Electrode is loose
– Self-monitors all detectors

1.3 LEEP PRECISION Smoke Evacuator Description

The CooperSurgical LEEP PRECISION Smoke Evacuator System three-stage air filtration system is
used to remove airborne particulate plumes produced during office and surgical procedures, and has
the following features:
– Low noise level
– Triple filtration of air provides an efficiency level of 0 .014 microns rated at 99 .999 percent . This
includes a pre-filter, a charcoal filter for odor removal, and a final safety filter placed after the
charcoal filter
– High air flow for plume collection
– Attaches to the CooperSurgical LEEP PRECISION Integrated System

1.4 LEEP PRECISION Cart (with attached LEEP PRECISION Integration Unit) Description

The LEEP PRECISION Cart:
– The LEEP PRECISION Generator and Smoke Evacuator in one unit
– Heavy-duty casters for mobility
– Storage shelves
Purpose of the LEEP PRECISION Integration Unit:
– The LEEP PRECISION Integration Unit controls the ON/OFF power of the entire LEEP PRECISION
Integrated System . (The LEEP PRECISION Generator and Smoke Evacuator
are powered through the LEEP PRECISION Integration Unit .)
Integrated System, which includes the following components:
TM
LEEP PRECISION Integrated System
Smoke Evacuator 120 VAC
Smoke Evacuator 230 VAC
Cart Integration Unit, 120 VAC
Cart Integration Unit, 230 VAC
5