Herunterladen Diese Seite drucken

Kärcher CWB 3 Originalbetriebsanleitung Seite 37

3-bürsten-portalwaschanlage

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Target groups for care and maintenance
Who is permitted to perform inspection, maintenance and
servicing work?
Work labelled with "Operator" may only be performed by instruct-
ed persons who are capable of safely operating and maintaining
the system.
Customer Service
Work labelled with "Customer service" may only be performed by
Kärcher customer service technicians or Kärcher-authorised in-
stallation technicians.
Service contract
We recommend that you close a service contract to ensure relia-
ble operation of the system. Please contact your KÄRCHER cus-
tomer service department responsible.
Preparation
For you own safety and the safety of others, the system should
be switched off when performing maintenance and servicing
Roof brush drive belt and belt pulley
1
Maintenance unit
2
Side brush tilt pressure reducer
3
Side brush lock pressure reducer
4
Wheel wash pressure reducer
5
Vehicle position 1 light sensor
6
Vehicle position 2 light sensor
7
Wheel detection light sensor
8
Portal movement start limit switch
9
Portal movement end limit switch
10
Lower roof brush limit switch
11
Pillar 1 door switch limit switch
12
Upper roof brush limit switch
13
Operator
Front portal maintenance overview
work. Since not all system components requiring maintenance
are freely accessible, some system components must be moved
during maintenance and servicing work. The "Manual mode" op-
erating mode is provided for this.
The manual mode is executed on the display.
DANGER
Risk of injury
Take care to ensure that you perform the following work steps on-
ly in the specified sequence.
ATTENTION
Risk of damage due to Manual mode
Do not use the Manual mode for washing vehicles.
1. Drive any vehicle present out of the system.
2. Ensure that no persons or animals are present in the system.
3. Switch on the system.
4. Select manual mode on the display.
5. Move the system components.
6. Switch off the system and secure it against being switched on
again.
7. Perform the maintenance and servicing work.
English
37

Werbung

loading

Diese Anleitung auch für:

Cwb 3 seriesCwb 3/2Cwb 3/3Cwb 3/1